Printable View
Has anyone done once successfully? I?ve tried same way as the gen 1 coyote and it chopped for like 2 seconds In mp0 then kicked out and just idled in mp1 so the I changed mp1 angles the same as 0 and then it tried to idle in a different mp, I read a bunch of old gen 1 ghost cam threads and even tried a few settings that were reccomended on the 3.7 and it just won?t do it. I?ve tried -40 /15 ,-40/20 nada . Anyone care to share ?
Changing the angles of the mapped points?
Try this instead:
ECM 38153, 38224, 38209
Probably have to raise the idle up to around 750rpm.
Yea I did adjust the mapped point angles and it would chop for a second then kick out to a different mp to idle smooth. I’ll look that one over thank you
I don’t see how doing any of that would make it chop though
It's forcing MP9 at idle. That's -40I/20E
Ah ok I guess I missed that when I peek at it last night
Forgot about the misfires. Misfire min tracking set for 1000rpm. Engine Diag>Misfire.
Of course P0605 is disabled. Something I keep forgetting to do lol.
Thank you I’ll try it out tomorrow
Idle can be pretty high if theres a lot of overlap at low rpm. big cam cars normally are at 1000rpm. i played around with -40/20 850-1000 till it would linger in a map. i had mufflers though I gave up and boosted it
Yea I tried settings posted above and idle speed and it just wouldn’t oh well
tried to do a ghost cam on my 2011 V6 mustang aswell
im getting into the same issue as you
i got it to chop but wantning to make it sound more agressive, tried getting the idle spark to be lower which will make it idle like i want but it just dont want to respond
did you manage to get it to not kick out to a different mp and idle smoothly ?Quote:
Originally Posted by Bill88stang
yes
Hey can you check your inbox or contact me at this mail [email protected] regarding the tune
did you ever figure it out? im trying to do a ghost cam but im lost on making it chopQuote:
Originally Posted by Bill88stang
I know its a novelty, but i would really love to know if you got the ghost cam working?
I know this post is over a year old, but did you have any luck getting the ghost cam settings to work?
It's works just have to change a couple mapped points cam angles and distance tables. Fuel trims will be way off initially too.