I have billet fuel rails no provision for the gauge or should I say yet.... Im going to swap out the corvette regulator with a adjustable FPR with a...
Not mad at you bro. I do appreciate the help, Thank you and i'm going to look into that stuff. I also am not upset that you called it a trash tune, I...
I run a little leaner on E60+ than I would on Pump gas but I usually set the PE tables the same and let the other alcohol tables lean out the car as...
TPS, APP, etc. are all processed by the ECM. That data is sent to the TCM and used for trans operation. No direct wiring from engine related sensors...
From my experience you will be better off adding fueling via the maf vs. the VVE table (assuming you are running an OEM style "blended" tune). In my...
I thought that too but it has the required 1.9lbs of freon. I have a set of gauges coming today to check high and low pressures. Using my fluke with...