|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools |
09-29-2008, 07:52 PM
|
#1 | |
|
Senior Tuner
Join Date: Jan 2006
Posts: 383
 |
486 Whp 2.4 Ld9
Not really sure where else to put this, so here you go..... This is a good friend of mines Z24 putting down some really respectable numbers on a Dyno Dynamics Dyno. This video was taken a few months back but I thought I would share with you guys. I did all the tuning with HPT and we are happy with the results, however I think there is more to be squeezed out of it.
Ignore the track times as the track we were at sucked ass, and we did nothing but spin on drag radials... Let me know what you guys think.... http://videos.streetfire.net/video/0...ash_174438.htm
__________________
 P&P Tuning 372.06 whp / 376.88wtq ***More Coming Soon!*** |
|
|
Location: STL
|
|
|
09-30-2008, 04:18 AM
|
#2 | |
|
Senior Tuner
Join Date: Jul 2006
Posts: 242
|
tagged for later
__________________
mods= turbonetics HiFi 60-1 ball bearing t3/t04E Hahn Racecraft Intake manifold Hahn Racecraft FMIC 4.5" core custom hot and cold side hard piping 79lb/hr injectors vulcan equal length tubular manifold 3" turbo back TiAl 38mm wastegate newly built motor, more to come soon |
|
|
|
Location: New York, New York
|
|
|
10-03-2008, 06:05 PM
|
#3 | |
|
Tuner
Join Date: Mar 2008
Posts: 30
 |
bad ass is all i got to say heheh
|
|
|
|
Location: St.Louis
|
|
|
10-05-2008, 07:23 AM
|
#4 | |
|
Senior Tuner
Join Date: Jul 2006
Posts: 242
|
just saw the vid..... you need better tires lol
__________________
mods= turbonetics HiFi 60-1 ball bearing t3/t04E Hahn Racecraft Intake manifold Hahn Racecraft FMIC 4.5" core custom hot and cold side hard piping 79lb/hr injectors vulcan equal length tubular manifold 3" turbo back TiAl 38mm wastegate newly built motor, more to come soon |
|
|
|
Location: New York, New York
|
|
|
| Thread Tools | |
|
|
