hi my map was set to 1 bar in my datalog that why , i got 180 kpa ..... but by the time today i found the stupid problem .... it was not in the tune , i decided to keep the feet on the floor and see what appen , the engine just go to 5300rpm then the cyl air mass just drop to .15-.20cyl and the rpm go to the rev limiter ....
i take a look on the installation kit and i remove the air filter kit and banggg the car rev to 6000rpm ... the air filter kit just get suck and no air can pass to the inlet of the supercharger ....
sometime we try to find so far when is a little thing
thanks for the help all you guys