Anybody get a PID working to look at KR on the hemis? If so please share, I can't get anything to work. Most of the other sensors are working, but knock is all I want lol
Anybody get a PID working to look at KR on the hemis? If so please share, I can't get anything to work. Most of the other sensors are working, but knock is all I want lol
It works, but it is an enhanced PID and has to be defined for each OS so if it hasn't been defined yet, it will not be available. I know it works on many of the 06 car applications, but I'm not sure of any others. I know they have defined about a half a dozen or so OS's. You may need to delete the OS file in your VCM folder to force it to re-poll for available PIDs.
Jaime
we have it defined for around 180 OS's so far. Post up you OS and i'll check
I count sheep in hex...
I have a 56028935AF
I guess I wasn't one of the 180
try 2.24.55 or later (available tomorrow).
I count sheep in hex...
You don't have to uninstall the software, I was saying to delete the .os file that matches your vehicle. You will find it in "Documents/HP Tuners/VCM Scanner/Vehicles" folder. These will be a list of all the vehicles that you have connected to and scanned. Find and delete the file that matches your truck, then connect you scanner again and it will re-poll for the available PIDs.
You may not have to do this after you load the update, but if it doesn't re-poll, then this will force it to.
Jaime
Just snagged up .57 I'm going to go play now. Thanks for the help guys.
Still unsupported for Knock. Let me know when .58+ is out lol
os 56028781AF looking for KR