I just got my lc-1 and I may be kicking myself because I bought it off of Ebay. The sensor is new in box and never opened and still sealed but it is a 6 wire lc-1. I did not now that there are 6 & 7 wire configurations. I would like to now if I am screwed since the 6 wire is missing the green analog ground. I have hptuners mvpi pro. I just hope I didn't get scammed.
2001 PEWTER TRANS AM
A4 2.73's
1/4..13.806, mph..102.63, 60'..2.153
STOCK
1/4..12.909, mph..108.06, 60'..1.932
SLP LM, SLP Lid, front sway bar MIA, & some free mods
it should not be an issue...Originally Posted by racecarr
I just got my lc-1 and I may be kicking myself because I bought it off of Ebay. The sensor is new in box and never opened and still sealed but it is a 6 wire lc-1. I did not now that there are 6 & 7 wire configurations. I would like to now if I am screwed since the 6 wire is missing the green analog ground. I have hptuners mvpi pro. I just hope I didn't get scammed.
I believe the uncoated wire is your ground on that
you can always check innovate motorsports website to find out for sure
-Scott -
innovate got rid of the green wire, the white wire is the system/analog ground now. they both were terminated to the same spot on the board in the first place. So now they are back to a 6-wire lc-1
Thanks guys for help. I can rest a little easier now. Just have to wait till it warms up and the snow disapears for me to install it now. Thank you
2001 PEWTER TRANS AM
A4 2.73's
1/4..13.806, mph..102.63, 60'..2.153
STOCK
1/4..12.909, mph..108.06, 60'..1.932
SLP LM, SLP Lid, front sway bar MIA, & some free mods
Reply With Quote