6.2 HC Expected Power

[jakevandee]

Hey all,

I'm new to the Dodge stuff. Spent a lot of time tuning Fords (primarily ecoboosts) and I'm now working with a 19' 6.2 hellcat. Has a Legmaker intake, Hellraiser 2.85 pulley with the green belt, ID 1050cc injectors, and hi-flow cats.

I see there's a lot less going on inside the ECU's compared to a Ford (Not even VVT!). Does anyone have an idea on an expected power output on 93?

So far just going to add injector data, dial in trims, fix up the airflow/VE and add some spark. These ECU's seem pretty straightforward and will do what you tell it to. Is there anything special I should watch out for?

Thanks much!

[jakevandee]

300HC injectors.hpt
Hellcat 300 5.22.24 base tune.hpl


I attached the injector table and log from so in this message. I understand how engines work, I just need help on understanding how Dodge implements their ECU's. Been going through a couple of resources, along with some tunes I've found on here, and I've noticed some of the tables are scaled differently between the pre 19' and 19'+, so I'm stuck until I learn the Neural Networks.