Double check me.. TCC all good? 5.3/4l60e swap

[Bum454ss]

050824_Drive_B.hpl

Good evening! I have a 2002 LM7 swapped into an 84 C-10. 5.3/4l60e 2nd drive on this build. All seems to be well. I just wanted to get some extra eyes on the transmission side of the log as I don?t fully grasp all of those parameters. I believe everything is good to go and it feels really good at this point. Maybe pulls at a stop a bit too much but the jury is still out. If you have a moment and see something alarming please let me know. Thanks!

There isn’t a PRNDL switch hooked up. Nathan Wei harness. TCC relay all good to pin 33 etc. 12v constant with ground on brakes.

[TransGo Robert]

You did not record any of the transmission parameters aside from the current gear and PRNDL so there is no way for us to know if it is working correctly or not.

[gtstorey]

You keep saying "Nathan Wei harness" like it means something. I had to do an internet search to see it appears to be a made in China harness.

[Bum454ss]

Thanks for this note. I’ll add those channels when I get home this evening.

[Bum454ss]

You did not record any of the transmission parameters aside from the current gear and PRNDL so there is no way for us to know if it is working correctly or not.

Thanks for this. I’ll look at this tonight.