Hey everybody! Working on my first tune. 2004 Suburban, 5.3/4l60e. I installed a BTR Truck Norris Cam. Everything else is stock, but I have a small stall converter still to throw in. Also, when the machine shop went thru the heads, they had to bore out the seats and fit bigger intake valves, so its got 2 inch intake valves instead of the 1.87.
Anyways, I have a wideband setup and I've been following chopper doc's ls1 videos for setting up tables and making it idle and such. I'm wondering though, at a certain point do you stop copying/multiplying the whole VE table by 1% or .5%, and just do the cells that are overly rich? I'm nervous that if I continue to just do "paste special" on the whole table, it'll push me into the lean range in several cells.
Also, being that its my first time I'd love it if anyone could check out my settings and such and confirm that I'm doing this right. I have it in speed density for all the tuning so far.
Thanks!