As of Software version 3.6 you can now tune the FSCM/C304 modules however they do cost additional credits in order to license these modules which you will notice once you attempt to flash them. If you have no plans to tune/modify either of these modules then when you start the read process simply select DO NOT READ on the modules you have no plans to modify, this way the software will not ask you to license them. Keep in mind these modules cannot be read via the bus so a stock file is generated for you(you will see a popup that will state this clearly as well). Currently Holden FSCM's are NOT supported.
- 1 credit each for FSCM A-F
- 2 credits each for 15-17 Corvette/ATS-V Chassis Control Module C304 (CCM)
- 3 credits each 17-19 Corvette/ZR1/Camaro/ATS-V Chassis Control Module C304A (CCM)
If you have any questions about this please email support BEFORE licensing. If you license one of these modules and then email support there is nothing we can do as we can only assume you wanted to tune that module.
Additionally the newest beta software 4.7 or newer will allow you to remove or add controllers from the Tune details-controllers window.