Ok so i am having an issue where when the pedal is pressed halfway down in its travel the pcm is sending a WOT command to the throttle body. This is causing the throttle to be very sensitive and with he pedal having been cut this just multiplies the effect. Once I get the chance I?ll post the HPt file so y?all can take a look. My equipment is the fixed pedal for the 2003 Tahoe with the tac module #12573059 and i dont currently have the part # for the throttle body. The pcm is the stock pcm from the donor vehicle. This has a non electric manual trans as this is in a 1989 wrangler. Any help either by marking what changes are needed or just explaining what to change is appreciated.
Here’s the HPT file https://forum.hptuners.com/attachmen...9&d=1709160087