Is it possible to help me get 1000cc injectors to work on stock ls1
Is it possible to help me get 1000cc injectors to work on stock ls1
Injectors are ID 1050
Use the data that ID gives you and plug it into the calibration. You'll want to cut the Min Fuel Milligrams in the transient fuel tab in half as well to help with the rich idle that most get.
Then you'll want to go over the MAF curve and VE table to get fueling dialed back in, it shouldn't take a tune of tuning to fix if the injector data is correct.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
I plugged in the data and it was wayyyy to rich I wasn’t sure how to dumb it down some
You have them set at 117.1217 lb/hr?
Post a tune and a data log. SOPOriginally Posted by tana99ss
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
Reply With Quote