Hey Russ K I'm trying to find the info on the GenIII but cant find it is there anyway you can send to me. Thanks in advance
Hey Russ K I'm trying to find the info on the GenIII but cant find it is there anyway you can send to me. Thanks in advance
Hello sir, could you possibly send me the attachment. For whatever reason its not clickable on my end
Anyone still here?? What software do I open that .cfg file with? VCM Scanner and VCM editor both don't want to open it. My car wont idle until it is doing less than 5 mph. six speed manual, and when I push the clutch in it stumbles with a hunting idle until the coasting car slows below 5mph. Then it suddenly is all better.
how do you transfer this to vcm
The issue is not wanting to start without pedaling but after starting it runs fine. It?s a square body swap with a 6.0LQ4,102 Holley TB, TBSS intake, 60LB injectors sloppy stage 2 camshaft, 243 heads, long tubes and 10.2 compression. I?m hoping to get past this issue before I start any ve or maf tuning. I have set the idle airflow and set the idle advance to 23^ and set the same in the base tables. I?m using a p01 pcm. Thankyou in advance