I have a 2011 E38 on a 6.2 in a streetrod. The Tach reads accurately to 2500 then falls off to 0. Is there a setting that is limiting the range? We're using Dakota Digital gauges.
TIA
I have a 2011 E38 on a 6.2 in a streetrod. The Tach reads accurately to 2500 then falls off to 0. Is there a setting that is limiting the range? We're using Dakota Digital gauges.
TIA
Last edited by rubrhammer; 11-14-2022 at 08:47 AM. Reason: Additional info
Try using 470 Ohm pullup resistor from tach wire to switched ignition.
2011 Cadillac Escalade L94 w/LS3 valves and valve springs
Will that affect the range that it is already accurate in?
It will not affect accuracy. Seems like your Tach gauge has too weak internal pullup and signal looses amplitude when frequency rises.
2011 Cadillac Escalade L94 w/LS3 valves and valve springs
No it just makes the signal for sure on/ for sure off. Google tach pull up resistor. Harmless to try.
Tuner at PCMofnc.com
Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs