Anybody know how to enable full torque shifts on a 2019 A10 ZL1? On the A8's there is a switch to enable/disable torque reduction upshifts which allow full timing through the shift. This is option is not showing up on the supplied A10 file.
Thx
Anybody know how to enable full torque shifts on a 2019 A10 ZL1? On the A8's there is a switch to enable/disable torque reduction upshifts which allow full timing through the shift. This is option is not showing up on the supplied A10 file.
Thx
Since no replies, I am going to assume tuners are using the minimum spark table to remove a lot of timing pull on the shift.
"torque reduction - speed control terminate - immediate" ?
Do NOT touch the minimum spark table.
This creates a safety hazard where the engine can suddenly rev out or 'hang' when a malfunction occurs that the ECM can't control with ETC or fuel: like a loose intake manifold or a stuck/jammed throttle.
Check to see if the parameter is available using the latest Beta. Otherwise, email hptuners support for guidance.
Last edited by 1badc10; 11-12-2022 at 01:46 PM. Reason: added info; v5.0.4
**Capt. Ron - 7th Dist. Fire**
If you update to the newest beta version HPT has unlocked a mulitude of new tables for the A10 GM.