I am trying to update my injector data from 5.3 (24 lbs) to LS2 12569115 using the attached data.
--- First issue is I noted minor errors in the injector data sheet, so does any one have a more updated sheet? or can the confirm the data, or point me to better information.
Next, I was trying update the labels in the injector, however I could not do this - it would not let me EDIT the labels? I have done the recent training, applied the codes (not sure if this is applicable in the question, but wanted to rule it out).
-- Can someone point me to either an educational video/link or better yet tell me how, why or what I am doing incorrectly.
Any better clues to what they are? Is that just an old number for 89017586?
What file are you trying to put the data into? Why do you need to change any axis labels? 2006 GTO is very very similar, injector-data-wise, to every P01/P59, and for the most part you can simply do a direct copy-paste from one file to the other.
I just did the conversion, the easy way, using an '05-'06 E40 (car) LS2 data, instead of '06 E38 LS2 data with the oddball axis labels. Copy in the tables shown here in green.
Thank you - yes, these seem to be odd part numbers, the other number I found was: 0280158049 - I searched the forums for these and found another user with same part. It was recommended to him as well to use the 06 GTO.
Thank you - I will do the copy and past - (compare and past) -