Results 1 to 2 of 2

Thread: Why you CANNOT use your stock Narrowband Sensors to tune WOT

  1. #1
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,265

    Why you CANNOT use your stock Narrowband Sensors to tune WOT

    http://www.wmsracing.com/o2/tech.htm

    http://www.fordmuscle.com/archives/2...vate/index.php

    http://www.team-integra.net/sections...?ArticleID=390

    http://www.turbobits.co.uk/acatalog/...io_gauges.html

    Now im not gonna go into the technical part too much, but the bottom line is stock Narrowband sensors are ONLY accurate at Stoich ~14.7:1

    Widebands are accurate pretty much anywhere between 10:1-20:1 in most cases.

    Bottom line, don't try to tune WOT with a narrowband because its pointless.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  2. #2
    Tuning Addict WS6FirebirdTA00's Avatar
    Join Date
    Jan 2005
    Location
    Concord, NC
    Posts
    8,093
    aww man why not

    I try to tell people yet they still dont seem to care. I have tuned several cars, all 12.8:1 on the WB but the mV were all different even with new sensors.
    Sulski Performance Tuning
    2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
    2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB