Hi,
I have a lsa with 234/249 114 lobe centre. It's running an 0411 pcm to retain factory functions with the car. Pcm map has been converted to 3 bar. Had a horrible time getting it to idle now it does but not by the tutorials online the injector data is from a post on Here, but I feel like I'm missing something. I had to add fuel approx 25% to get it to idle , it's now not terrible but essentially won't increase revs unless very slow pedal input , anything remotely normal would case it to cut out, it's dbc and tps voltage was set to .51v , I know I'm doing something wrong but just want to get it close enough to get on trailer to go to dyno. Any help would be amazing.