-
Tuner
E67 TBSS OS 12611938 - Reverse lockout PIN
Hey everyone,
Has anyone on here successfully enable the reverse lockout on a TBSS file? I can't use CTS-V/GMPP for other reason (AC/Cruise etc..) on a custom build.
The only thing that doesn't work on the TBSS calibration is the reverse lockout.
I don't want to retrofit anything, and have the functionality enabled in the tune. However, I'm told that the PIN might be different for a TBSS than on a GMPP (GMPP is Pin 8 C3).
Thanks for any help.
Mourat
-
Advanced Tuner
I can do practically anything with an e67, I converted auto to manual.. the entire tune, reverse lockout , cruise 0-5 volt or discrete clutch input.
-
Advanced Tuner
You can use a ctsv file be a lot closer, I can?t see why a/c would not work, cruise can be made to work using the ctsv file, but I would need to lock the file after, as that took me forever to find in hex!!
And you?d need a ls2 silverblade car TB.
-
Advanced Tuner
As far as the reverse lock out pin same location on all e67s, c3, pin 8. But it?s not enabled in the pcm, again something I can do in raw hex