Hi guys. I am having some issues with my new SEP 1500s. I was running deka 60s and the tune was perfect. i swapped injectors and it all went south. I got all the injector info from SEP site on the excel sheet. I calculated my flow rate correctly (boost/vacuum ref at 60 psi base). the truck drives at throttle and in boost just about the same as it did before. However, my off throttle coasting down at slow speed spikes lean and rich, my idle is very rich, and it wont start without giving it throttle (seems lean?). it used to fire right up no issues. I looked at the base tunes for these injectors but it seems everyone is using different settings. Any input would be great. thanks. attached is the tune for reference.
Suburban_3Bar_tune_9.hpt