I have changed flow rate vs kpa and offset. Is the inj pulse adder from fic data the same as short pulse adder in hp tuners? Also min inj pulse and short pulse limit data doesn?t specify a pcm. Does this data need to be applied? Is there anything else that needs to be changed? Thanks
Injector flow rate, short pulse adder, min injector pulse and the offset data much be changed over when swapping injectors.
Likely that injector pulse adder is the short pulse adder, just look at the labels for the table, if they match in the editor then it's the same.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Thank you
Reply With Quote