Background
I bought the MPVI2 exclusively to support remote telemetry via TrackAddict. I will not be doing any engine tuning. I've had it about a year and I've never even installed any of the desktop software (VCM Suite, etc.) until just now so that I could update the firmware.
I know that I could also use it for engine tuning, but I already had a shop use HPTuners and a dyno to tune the engine, and I'm very happy with it. I don't have any other cars that I'll be tuning.
After I bought the MPVI2, I discovered that I'm not getting any more data through TrackAddict than I get from a cheap OBD2 bluetooth module.....so I was excited to see that the Enhanced Scanning option was coming and is now here.
I went to try it out this weekend, and I found that I need to get the pro option ($250) to use the enhanced data. This is a lot of money just to enable better telemetry, especially considering that my initial $299 purchase did not give me any more telemetry than a cheap OBD2 module.
Question
Is there a way to find out what extra parameters will be available to me on my specific car before I spend the money? I have a 2007 Dodge Caliber R/T.
I'm specifically interested in knock data, data from the secondary coolant temp sensor, oil pressure switch state and anything else that is interesting.