I am working on a customers 2004 Z06. I have a set of ID1000 injectors in it and no matter what I do I cant get minimum pulse width below 1.8ms. I was wondering if anybody else has had this issue? I have tried the car in SD and nonSD. with the results always being the same. I have also tried rescaling the tune even though the flowrate says it can go that high without any issues. This car has a return style fuel system and base pressure is at 50psi. This was just a test tune so I know there are things that need to be done but the basics are there for the injector info and to make this thing idle and drive right. Makes me wonder if there is a hard code in the ECU that won't let it go below 1.8ms.
I appreciate any info.
Thanks
2004_Corvette_Z06__SD_3_ID1050_test.hpt