Need some help,BIG cam =, stubble off idle and hard start. 2014 camaro LS3

[fctry286]

Im pulling my hair out. the car runs and drives great. I don't get any surging or anything. I just cant get the car to start without giving it a little pedal, then its a little rough and starts idling. if you try to blip it off idle it stumbles and pops, even does it while your driving from a stop. i can not figure out what I need to change to fix.

on top of that if you hold the break and hit the gas car does not burn out or even try to rev. so wierd..

any help is greatly appreciated.


Jessie_RPM_2014camaroLS3_bigcam_forgedinternals_12.5AFR.hpt
wont let me attach the log file

[mclarkesr]

I'm have similar problems with the same car, BTR STG 3 cam but mine starts fine. I have a major stumble if I give it anything more than light throttle from a stop.

[Area47]

drop cranking ve to 80 and try again. your idle timing tables would fix the stumble off idle to a certain degree.

[fctry286]

Ok ill try that.. what would cause the car to not make power while holding the brake? Doesnt even rev

[Area47]

torque management > brake torque limit

[fctry286]

torque management > brake torque limit

yea I thought so, didnt help.

I have to get the stumbling off idle fixed. its fat just not sure what table that is to correct it.

[SultanHassanMasTuning]

both air models need to be tuned