Does any in the St. Louis are have hp tuners... I need an ecm reflashed for my S10 project... Most places want an arm and a leg to do it..Id rather help a member out..
Does any in the St. Louis are have hp tuners... I need an ecm reflashed for my S10 project... Most places want an arm and a leg to do it..Id rather help a member out..
What do you need flashed on it?
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
Need an express van bin flashed to it.. Then remove vats,change speedo,etc... Basically just turn off stuff
I assume the ECM doesn't start off with a V8 calibration. If you can get a V8 van file flashed in, I can do the easy stuff for fifty bucks. I have a friend who can probably bench flash it with a Tech-2.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
No its the stock v-6 comp... let me know if your friend can flash it.. its the only thing keeping me from driving my blazer again
Get me the VIN for an appropriate van file, and we can go from there.
DSX Tuning - Authorized HP Tuners Dealer
http://www.dsxtuning.com
http://www.facebook.com/dsx.tuning
Just say no to bull s***.
IF YOU WANT HELP, POST A FILE!
Try this one.. Found a van on ebay that had the vin listed
1GNFG65RX11219048
I think I found the express van .bin file.. Just need it flashed to the ecm and turn off the esay stuff
me and the gf toke a trip to West Plains.
Had brendan from lt1swap.com flash the ecm... Great guy to deal with..