Strange new error...MAP 0, Advance -64, and O2 dead

[S8ER01Z]

I added some diagnostic PIDs because my car is just 'off' and I cant seem to find the problem. After some logging this morning I am seeing some very strange things happening and hopefully I just messed something up.

The MAP, Advance and O2 sensor just freak out over and over again. Logging too much data?? Can one sensor fail/short and cause this?

Odd.jpg

OntoWork.hpl

default imperial and PLX DM6 and histos MAF in HZ.cfg

[S8ER01Z]

http://www.hptuners.com/forum/showth...one-Datalogger

Looks like I need to log less data?? I will remove a few PIDs and see if that corrects the issue. In the future could the program give notice for something like this? At least a tip or something that explains what can happen and how to correct it?

I will update the thread later once I have confirmed if this was the problem or not.

Thanks.

[Bill@HPTuners]

Unfortunately not, it varies from processor to processor from what I can tell.

[S8ER01Z]

Unfortunately not, it varies from processor to processor from what I can tell.

Fair enough... lowered number of items and everything is working just fine again.

Thanks!