Originally Posted by
wayfarer
ok, I updated the first two, they're easy,
but the"offset vs volts vs vac" table ---first, its my understanding that as long as that's what's selected in the first bar, I don't need to address the "...vs map" table at all... correct?
then, in order to get correct values into that table --I don't actually have the correct info. I have the Omega spreadsheet that gives me 80's and 58 psi, where I'm at 89lb at 43.5psi -- so am I stuck using my current values and the -39kpa column, and then tuning as suggested?
currently my "short pulse limit" is 0.00 -- should I have a value there?
I read alot about zeroing the "short pulse adder" table -- about the first half of my table has values, the second half is zeros. Should I zero that table ?
my "min pulse width" is at .102 -- is that ok ?