I can't figure this out for the life of me, I've tried messing around with all the PE settings to get it to richen up quicker, but the thing that really bothers me is the little lean spike in the middle of a WOT pull, see the below screen shot of the log. I have tried to re-scale the MAF in that area but it really messes with the curve when I do and it doesn't seem to help, the picture of the MAF curve shows what a Multiply % - Half looks like if I use the error data from the log, that doesn't look like a proper solution to me.
G8GT with a TVS1900, headers, and cone filter. Suggestions are welcome.
SOLVED!
Engine -> Fuel -> General. Injector Control, Enrich Desoot Mode
Set to disabled.