Yes it looks like nobody cares (anymore)... unfortunately...
Yes it looks like nobody cares (anymore)... unfortunately...
'97 Jeep Grand Cherokee ZJ, 5.2L (Canada Import), 2" Lift
(CAI, Modded Kegger, Ported TB, 3" Cat-Back, SCT Custom Tune)
'98 Jeep Grand Cherokee Limited ZG, 5.9 V8, Stock
'03 Skoda Fabia, 1.4L 16v
'98 Chevrolet Camaro V6, 3.8L, Targa, ZZP GT1 Cam, Dynomax Cat-Back [sold]
lol yea they say dodge stuff will come out once 2.24 is released but they havent even updated the interface since summer of 2008 which was 4 and a half years ago haha so im not holding my breath. if it ever does come out ill get it but its clearly on the backburner. the last JTEC vehicle was probably around 2006-2007 so i dont know if it will ever even come out anymore.
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
I would be VERY surprised if it would ever come out...
Fortunately there are alternatives like MS2/MS3. Sure its not as comfortable to use as HPT because of the wiring but as soon as it is installed, it works great.
- Mat
'97 Jeep Grand Cherokee ZJ, 5.2L (Canada Import), 2" Lift
(CAI, Modded Kegger, Ported TB, 3" Cat-Back, SCT Custom Tune)
'98 Jeep Grand Cherokee Limited ZG, 5.9 V8, Stock
'03 Skoda Fabia, 1.4L 16v
'98 Chevrolet Camaro V6, 3.8L, Targa, ZZP GT1 Cam, Dynomax Cat-Back [sold]
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
Megasquirt http://www.ms3efi.com/
It can be installed in parellel to a JTEC ECM.
'97 Jeep Grand Cherokee ZJ, 5.2L (Canada Import), 2" Lift
(CAI, Modded Kegger, Ported TB, 3" Cat-Back, SCT Custom Tune)
'98 Jeep Grand Cherokee Limited ZG, 5.9 V8, Stock
'03 Skoda Fabia, 1.4L 16v
'98 Chevrolet Camaro V6, 3.8L, Targa, ZZP GT1 Cam, Dynomax Cat-Back [sold]
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
The one on the website looks really big but there are also smaller cases. I think it's worth to look at if you plan big mods to your engine. Because even if HPT supports JTEC someday, the ECM itself is quite limited.
'97 Jeep Grand Cherokee ZJ, 5.2L (Canada Import), 2" Lift
(CAI, Modded Kegger, Ported TB, 3" Cat-Back, SCT Custom Tune)
'98 Jeep Grand Cherokee Limited ZG, 5.9 V8, Stock
'03 Skoda Fabia, 1.4L 16v
'98 Chevrolet Camaro V6, 3.8L, Targa, ZZP GT1 Cam, Dynomax Cat-Back [sold]
I can work magic on the JTECs....I specialize in tuning them. Come see me if you want a JTEC tune done right. [email protected] I can provide references for my work.
I can do NGCs too- I don't do them quite as often but I can do them no problem, as long as its a truck (no SRT4 as I didn't purchase that group of cars)
just a bump to remind of the never dying interest in JTEC+ tuning!
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
So, being that Viper JTEC is getting closer, is there intent to support other JTEC applications? (esp late 90's trucks?) or is this not even planned at this point? I am not in a real hurry, but kind of wondering if I should look into having someone else do me a tune.....or sct...etc.
The beta will read them.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Oh ok great.
Ok I'm going to resurrect this. Apologies. Don't shoot!!!!!
Microsquirt. You can hide it behind the JTEC and if you are tidy no one will ever know it's there. 30psi and looks like it's running off the factory ECU.
bump...
2002 Dodge Dakota 5.9 R/T reg cab
Heads/Cam/Stall/Suspension/Tires/170stat
365rwhp & 365ft-lbs
1/4 mile: 12.4@110mph
1998 Pontiac TransAm Ws6
Heads/Cam/Stall/Suspension/Tires/160stat
422rwhp & 400ft-lbs
1/4 mile: 11.6@116mph
2006 Chrysler 300c Srt8
Whipple 6.5psi/HHP Stage 2 Heads-Cam/Borla/88mmTB/180stat
580rwhp & 490ft-lbs
never drag raced
2009 Dodge Viper
Mopar Performance Race Exhaust & PCM
Bump
LoL...it's here.
https://forum.hptuners.com/showthrea...-JTEC-Support!