Put together a fresh build with a trex cam, Factory Map. Ive been messing with the idle for a few hours now and i cant get it to idle on its own.
No Maf or O2 Sensors, but all the sensors are working correctly. I cant seem to control the IAC count very well it wants to go over 150 on its own. i demand it on scanner, but even then it doesnt seem to want to idle. I have to constantly give it throttle. I have all the correct injector data for factory 02 injectors 28.8#
Ive messed with the fuel and timing I dont think its that. I believe the MAF isnt failing i have the DTC's on 2 and ive tried 3. Still no luck.
The base running airflow seemed to be lower than most so I changed that as well.
Any help would be appreciated guys Thanks.