hi guys i just install my lc1 with gauge and i cant get it to stay steady it bounce all over place cruise from 14.7 to 21.0 and WOT it run from 14.7 to 12.2 and my hot ground i grounded it on the passenger head thanks in advanced btw im new here
hi guys i just install my lc1 with gauge and i cant get it to stay steady it bounce all over place cruise from 14.7 to 21.0 and WOT it run from 14.7 to 12.2 and my hot ground i grounded it on the passenger head thanks in advanced btw im new here
This is kinda of an add on to your question. But whats acceptable for AFR to chagne on a WB? I noticed the AFR never stays stable either jumping around .5 point or more. Is that acceptable? I figure once AFR is dialed in more maybe this problem will resolve?
Email Tunes, [email protected]
96 TA Blown/Stroked, 4L80E/Fab 9
15 C7 A8 H/C 2.3 Blower/PI
14 Gen 5 Viper
Custom Mid Engine chassis, AKA GalBen C
another question i dont have that option in my logworks 3
i install the program and this what igot LM programmers v3.22 and logworks3
nvm thanks i got it