So my question is, is there anyway to swap credits over to another PCM. I did a LY6 swap about a yr ago and the customer finally got around to getting the truck ready for startup. It was a long term project 62 Ford unibody. Credits were bought on a 411 PCM and a startup tune was made. Once we tried to fire it up only the #1 coil would fire, and all the injectors were working. I swapped it with another known good 411 PCM and it fired right up without any issues. Everything in the tune was double checked to make sure that wasn't the issue. So can this be done without having to buy credits all over again for another PCM to put in it?