Here is an idle scan I did, my car is an 01 Z06/408 with a ported LS2 TB and FAST 90. The IAC is steady at 310 but the scan seemed to work and the car idles well. Do i need to do anything with the IAC table/scan for something? I don't know what to do/what it means. thanks.
DBW doesn't have an IAC motor
You logged the wrong PDI. Log IAC Desired Position and you will see what you want
Paul
Modern Muscle Motorsports
www.modernmusclemotorsports.com
Custom tuning using Diablosport, SCT, HP Tuners, Tuner Cat, FAST & Holley
Dynojet 224x mobile dyno
The electronic throttle vehicles do not have an IAC. To tune the idle look for RussK's gen 3 idle tuning config and procedure. Basically just start it up cold and let it warm up while logging desired idle airflow or something like that. Then just copy that into the tune.
Bill Winters
Former owner/builder/tuner of the FarmVette
Out of the LSx tuning game
Right, I know they don't have the IAC motor but I was wondering if the table affected the ETC TB in some other way (like a multiplier or something) or if I could 0 it out and see the no effects. I did use RussK's config and the log from it is posted..... Thanks!
Reply With Quote