Can some 4l80 guy figure out my shift points for me

[ALB]

I can't seem to get my tune to do proper shift points.
I had to input in manually to get my speedo right. No idea why. My blended 4l80 file was 2.23 but now converted it from read off car to 2.22. I had not good luck wiht 2.23 and waiting for the new 2.24. I won't use 2.23 again.

I am trying to figure shift points for 4l80 with 3.54 rear gears. But also my blended file is truck file and trucks shift very low. I will shift at like 6700 with redline of 7000 at track. Or at 6500 redline with 6200 shift points on street. IF you change redline doesn't the shift points part throttle change as well?

[slow67]

I can't seem to get my tune to do proper shift points.
I had to input in manually to get my speedo right. No idea why. My blended 4l80 file was 2.23 but now converted it from read off car to 2.22. I had not good luck wiht 2.23 and waiting for the new 2.24. I won't use 2.23 again.

I am trying to figure shift points for 4l80 with 3.54 rear gears. But also my blended file is truck file and trucks shift very low. I will shift at like 6700 with redline of 7000 at track. Or at 6500 redline with 6200 shift points on street. IF you change redline doesn't the shift points part throttle change as well?

Try out Bluecat's spreadsheet:
http://www.hptuners.com/forum/showthread.php?t=27981

No, if you change WOT shift points, it will not change the part throttle. Just make sure the 100% TPS shift point is the same as the WOT shift point.