Is there a write-up that covers all the things you have to do to complete the 2BAR conversion? I thought it was you simply put in the correct MAP sensor falsh the new OS and its done, at least that was what I believed from the directions that say how to apply the upgrade. I found out last night on ls1gto.com that I have to fail the MAF and make sure the MIL is still active to get it to work right. I didnt see that anywhere in the reading unless I missed it, I have been sick for a week. I also found out that I was wrong in my assumtion that it was a completely new file. Before doing the conversion I had the tune set up to calibrate the MAF in OL, after applying the conversion I had to go back and set up everything in SD. I think these are some things that should be explained because as far as I read, the directions say that the 2BAR can be applied to a stock or existing tune, which is what led me to believe it was a new file with the upgraded tables.
Someone let me know if I am off base here, I've been doped up on nyquil for a week or so