I connected my LM2 to the HPTuners Pro and the reading on the HPT scanner were not the same as the handheld. I dunno what i did wrong.
I connected my LM2 to the HPTuners Pro and the reading on the HPT scanner were not the same as the handheld. I dunno what i did wrong.
I think i fixed it. i need to program the lm2 for offset voltage and for 10-18 afr thanks guys!
Edit: I take it back, that didnt work out. The wb was reading 12 afr and the eio was reading 10 afr. I cant figure it out
Last edited by Dirty 30; 02-05-2009 at 04:09 PM.
So do any lm2 users have an accurate analog output setup for hptuners on their lm2 controler? If so any details for us?
cheers tim.
Give it a go yourself first, if it doesnt work out then pay someone.
As omega said im only planning on connecting the lm2 for the afr input to the mvpi for afr logging, the usefull logging features of the lm-2 are good for cars that hpt's scanner doesnt cover but if you can use hptuners why would you want to log with something else given what hpt can do for its supported vehicles.
Give it a go yourself first, if it doesnt work out then pay someone.