00 GTP license major problems!

[Bill@HPTuners]

not with the license but the file read from the computer every parameter is wrong or at least has to be wrong...I'll start with the small stuff

operating sys: 9384051

fan temp turn on: 472 & 411 respectivly
turn off:276 and 262

high & low octane tables all over the place...high octane high of 225 low of 0 and as a whole makes no sense

ve table 0's through 2800 rpms then from there it peaks at 395% supposidly.

This is the same car i was getting strange scanner files off of a few weeks back...but i didnt get the tuning software for it till early this morning so this just adds to my perplexity and really dont wanna change anything knowing something just aint right.

[FastFieros]

Where did you get the PCM? The OS ID is wrong.. It should be 09384050

You can email me the file and I can look at it and tell if it is custom already.

[email protected]

Thanks
Loyde

[Bill@HPTuners]

Where did you get the PCM? The OS ID is wrong.. It should be 09384050

You can email me the file and I can look at it and tell if it is custom already.

[email protected]

Thanks
Loyde

thanks for the heads up, I'll send the file on my lunch, i bought the car used but as far as i knew it was a stock computer

[Chris@HPTuners]

how about emailing support with the bin file so we can take a look? My 9384051 bin opens just fine...

Chris...

[Bill@HPTuners]

how about emailing support with the bin file so we can take a look? My 9384051 bin opens just fine...

Chris...

i sent a copy to support, fastfieros helped correct my issues in the meantime adn it looks as if it fixed the scanner woes i was having previously as well...weird shit.

[FastFieros]

Chris, not to take away from your service, but I opened that 9384051 and it was all over the place but right.

I have loaded 09384050 about 200 times in various VCM's so I know this OS ID very well.

I simply changed his OS ID in the Hex editor and it resolved the issue. All tables were correct, and it appears he can now load the VCM.

Loyde

[Bill@HPTuners]

Chris, not to take away from your service, but I opened that 9384051 and it was all over the place but right.

I have loaded 09384050 about 200 times in various VCM's so I know this OS ID very well.

I simply changed his OS ID in the Hex editor and it resolved the issue. All tables were correct, and it appears he can now load the VCM.

Loyde

i was able to load it...thankfully ive got the pro version now otherwise the std. version wouldnt have been able to do it since i had to rewrite the OS...uploaded it, then downloaded the file again just to make sure everything was cool which it was...should have a mild base tune in it for the track tomorrow

[Chris@HPTuners]

this is interesting my 9384051 does not match yours, i have changed the editor definition to match yours as yours is correct :huh2:

[Bill@HPTuners]

this is interesting my 9384051 does not match yours, i have changed the editor definition to match yours as yours is correct :huh2:

im not sure if i understand...are you changing the editor for future versions? Should when the new version comes out reload MY stock file that i sent you? Or just keep with the new os # i have?

Thanks
Bill

[FastFieros]

im not sure if i understand...are you changing the editor for future versions? Should when the new version comes out reload MY stock file that i sent you? Or just keep with the new os # i have?

Thanks
Bill

No, Chris .... is just updating the OSID lookup tables in the editor for the HPT software. It does not effect people unless they happen to have the 2000 PCM with that same OSID...

Loyde