histogram, can't find table

[Fox95]

trying to set up a histogram for the table "voltage vs. flow vs. pressure"

can't find it in the list when I'm in the scanner trying to set up the histo for it.

if it's not supported yet, can we get it soon. this is a very important one to have, for getting the fuel pump voltages right.

also I tried setting up histograms for the borderline knock table and mbt table, and I can get them to work, but the labeling on the axis for load on both these tables in the scanner histogram does not match the load values in that same axis in the editor?

did anyone ever address the errors in the ETC tables for feed forward and effective area?

[Bill@HPTuners]

can you post a scanner log along with the .hpt file in question so I can take a looksee?

What errors are seen in the ETC tables?

[Fox95]

http://www.hptuners.com/forum/showthread.php?t=19192


working on the info log and screen shots for you for the hitogramstuff.

ben

[Bill@HPTuners]

Thanks, in the future if you find a calibration issue make sure you email us at support at hptuners.com as posting it makes it nearly impossible to track its progress and in actuality was never added to our to do list because of this. This is one of the reasons I've disabled pm's on my account as there is no way to track them or their progress.