i have a 2004 gto A4, LS1, with a mti g1 cam (228/232 .588/575 113) ,homemade intake using 2002 corvette tube to get the filter in the front of the radiater, long tube headers, 3" exhaust no cats and dumped at the IRS. i have spent the past two weeks tuning but im lost. where should i go from here?
?
You didn't even say what the problem is.
1) specify what it is you are looking for, or whats wrong
2) your primary VE table looks...interesting. Whats up with the super lower values in the idle areas?
3) are you running 32# injectors?
i cant even out the o2's. the car seems to run rich and the knock rises to 6 in WOT. im running stock injectors, i thought they were 32lb's.
im trying to learn on my own but i feel like its time to ask for help before i damage my car.
post scans
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
Originally Posted by judged1
Stock injectors for the 04's are 28#'s IIRC, but you injector table has been modified.
Flash back in the stock tune and start again. Change only one thing at a time.
I would start with idle, as thats the first thing your car does when your crank her over...
;0
Just set the injector scales right, if you have changed the injectors, or you will be chasing your tail.
verry cool
thank you
I don't normally post and ask questions because people tend to be negative in response.
ignore those comments then. there are people here that will help. ask over on LS1GTO too as there are some tuners there too.
2004 GTO Blk/Rd M6 (Ziggy)
Best ET: 12.390 ET, 112.73MPH, 1.819 60ft
you can't be scared to learn, everyone asks stupid questions and sometimes they get shit for it. We have all been there and learned from it.
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
Hey i got a question thats kinda off topic so I am sorry but what program are you guys reading his tune under? Mine is trying to open under adobe reader and its not working!
Trying to open with adobe?? Should open under HPT if you have HPT installed on the computer.
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB
Might pay to check your default file association for .HPT files under [Tools|Folder Options|File Types]
X2, I had to do the same with my install and vista.
here is a scan from today
Reply With Quote