CPIG Instructions....
SET IDLE SPARK:
• Go to all your spark tables and set the park and drive idle values to about 22 degrees.
Question: What are the park and drive values they are referring to...from where to where in others words.
CPIG Instructions....
SET IDLE SPARK:
• Go to all your spark tables and set the park and drive idle values to about 22 degrees.
Question: What are the park and drive values they are referring to...from where to where in others words.
VCM Editor --> Engine --> Spark Control --> Spark Advance
Idle Spark Advance for In Drive and In Park.
Probably the entire 400, 800, and 1200 columns.
I assume you have a cam? If so, you will most likely need more timing than that. Early cals come with ~22ยบ factory
Sulski Performance Tuning
2000 WS6 M6 - LS6 (long block, refreshed top end), 10.8:1 CR, 90 mm ported FAST, Exo-Skel, 227/232 cam, QTP HVMC, EWP, GMMG, 9" w/4.11s
2018 Sierra SLT 5.3L A8 - Airaid intake tube, GM Borla catback, L86 Intake/Ported TB