Results 1 to 5 of 5

Thread: Delivered engine torque vs maximum engine torque

  1. #1
    Advanced Tuner
    Join Date
    Sep 2016
    Posts
    391

    Delivered engine torque vs maximum engine torque

    Hey guys, i have been having torque management blip 15* of timing out, i notices that it happens when delivered engine torque goes over maximum engine torque, but none of the changes i have done fixes this
    lt4 inj dyno too much alcohol.hpt
    streetmiss1.hpl

    on this log you can see it it at 6000rpm hoy it blips timing out, and you can hear the car changing tones one it does that

  2. #2
    Potential Tuner
    Join Date
    Apr 2019
    Posts
    1
    I?m sure someone will give you a direct answer. I?d recommend reading this thread.

    https://forum.hptuners.com/showthrea...-Torque-values

  3. #3
    turn AC off and try again... seen this on lots of camaros.
    if its gone then set you AC en/disable rpm higher

  4. #4
    Advanced Tuner
    Join Date
    Aug 2014
    Location
    Central, LA
    Posts
    737
    Quote Originally Posted by dertobi View Post
    turn AC off and try again... seen this on lots of camaros.
    if its gone then set you AC en/disable rpm higher
    Yep agree. 6050 rpm. 100% ac.


    That being said something is going on with bank 2. I think you have a miss but your log is already named that so you may know.

  5. #5
    That blip you see there is your shift torque management. You can disable it if you want, but your trans won't last long...