-
Potential Tuner
Popcorn and bangs 2013 mustang 3.7 V6 ? need help
Hi guys i have 2013 mustang 3.7L v6
Can anyone tell me how to tune pop &bang tuning
Hp tuners ? best regards
-
Tuner
Post up your tune Fahad. You can start by going to Fuel-Cutoff/DFCO tab and in DFCO section raise Enable RPM to 7000rpm and Disable Load to 0. Then go to Spark-Advance tab and in MBT 0-3 take the top two rows (lowest loads) down to about 30 from 2500-7000 and you can start there. The lower those numbers, the more aggressive it becomes. You absolutely do not want to have catalytic converters in place or they will soon die a terrible death.