Is it possible to get very good low RPM drivability from a big CAM LS2? CAM spec .050 duration are intake 240 exhaust 256. Am I just better off just replacing with a Stage 2 CAM?
Is it possible to get very good low RPM drivability from a big CAM LS2? CAM spec .050 duration are intake 240 exhaust 256. Am I just better off just replacing with a Stage 2 CAM?
That's a big cam for a stock displacement LS2. I'd recommend something in the 224/230 dur at .050" range on a 112-113 LS. It'll drive much better.Originally Posted by jmulhearn
Thanks for the input.
Reply With Quote