So the LS3 is up and running all good. I have two issues.
1) When I set dynamic airflow to 400 RPM the car idles awesome BUT does not respond properly to throttle, back fire to the intake.
2) When I set dynamic airflow to 8000 RPM the car picks up throttle perfect and all is good except cranking and coming to a stop. it dies instantly and struggles to run.
The car has a mild cam, 92mm throttle body(cable), LS3 maf sensor and adapter harness
can some one shed some light to what should I now? which parameter is upsetting the car.
This car has been tuned previously on cam only LS1 and what i did just make the car run or start on LS3.
I tried adding/removing fuel from VE table with no use, altered many of the throttle settings under idle tab with no use.