If I want to cut down on the pop bang burble, do I increase or decrease the DFCO entry spark or is there some other way of taming it?
If I want to cut down on the pop bang burble, do I increase or decrease the DFCO entry spark or is there some other way of taming it?
Cylair Enable and Disable - Focus on these with a cam - you'll need to increase them. You'll want to increase spark like you said too. Then just make sure dfco is setup to work - you can even play with rpm and temp settings.
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
Thank you Sir! Ill play around with it and see if I can get it to do what I want it to. I appreciate the direction Greg.