Hi, I've been having trouble getting my swap fired up, I couldnt get the injectors to spray at all.
Ive tried tested the injectors out of the engine and they do work, they have ignition power but the ecu didnt ground them at all.
vats seems removed and I've changed engine diagnostics ses for antitheft and tried some other ones too.
I did end up getting it to fire, but only for a couple seconds, it still doesnt say the injector pulsed at all?
To get it to fire I found fuel cut was set to 40 rpm, but its a fuel cut that most ecu's don't seem to have?

issue #2, this issue started while trying to work out the injectors. my tps stopped working when I plugged a ecu in.
I plugged another same model p01 ecu in and now the tps doesnt work, I tried replacing the tps, checked the pins in the ecu and checked the wires but cant find any issue?
the tps does not get any dtc's but just doesnt read?

any help is much appreciated, Matt

run.hpl
first ls1.hpt