On scanner the PID for cold start stays on Yes even after engine is up to normal temp. Also my MAF reading is almost at 10 g/s at idle but won't read on the graph. also my IAC stays at 310 all the time. What causes the computer to stay in Cold start mode? I am following the idle tuning guide by Rinkrat456. Also after i put it in closed loop mode on cold start it back fires when try to start but in open loop it does not.
2003 2500hd 6.0 / NV4500
engine stock except has a BTR truck torque cam, cold air intake and shorty headers.