called Texas speed to discuss manifold vacuum at idle. the tech says it should roughly be 15" of vacuum at idle. i cannot get more vacuum unless i increase the timing to 26 degrees (which i "think" is too much) and it is only 13". it idles ok but i feel it could be a little better.
i have replaced gaskets on the intake and also fixed an issue i had where the intake wasnt setting down all the way due to the rear steam ports im running. i feel confident that this intake is not leaking anymore. (i do know that they are prone to vacuum leaks. had it off and on 3 times now.) will someone please take a look at my tune and log to see if its in the tune itself or if im wrong and the intake is somehow leaking?