Results 1 to 3 of 3

Thread: Comment in Vette Forum re VE tables

  1. 11-30-2006 #1
    07C6
    07C6 is offline
    Tuner in Training
    Join Date
    Oct 2006
    Location
    McFarland, WI
    Posts
    19

    Comment in Vette Forum re VE tables

    foff667 stated that there are no VE tables in the E38/E67 ECM's. Someone else came back with the statement that he mispoke, that it should have read the product does not support the VE tables in the C6, that they are definitely there and then posted a screen, showing a VE1 and VE2 table, presumably from some other tuning product reading a C6 ECM. What is up with this??? From the Corvette Forum C6 tech section
    Reply With Quote Reply With Quote
  2. 11-30-2006 #2
    Chris@HPTuners
    Chris@HPTuners is offline
    HP Tuners Owner Chris@HPTuners's Avatar
    Join Date
    Mar 2003
    Posts
    4,861
    those VE tables are not used for main fueling, they are only used as upper and lower altitude limits during reversion. ie. good luck tuning with them

    The speed density parameters for the E38/67 are in our latest release, there is a sticky at the top of this forum.

    Chris...
    I count sheep in hex...
    Reply With Quote Reply With Quote
  3. 11-30-2006 #3
    07C6
    07C6 is offline
    Tuner in Training
    Join Date
    Oct 2006
    Location
    McFarland, WI
    Posts
    19
    Yes Chris, I read your sticky at the top re the E38/E67 SD tunes, in fact I read it several times. It gave me a headache. Thanks, John
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »