Customer brought 1954 F100 in for me to run all the wiring for. Customer had the wiring harness done by some guy in Texas who goes by JDKustomz.
The guy who cleaned up the harness cut out all the wiring for the Fuel pressure control module.
My tuner is having a problem getting the engine to run at all.
Can these engines run with no FPCM at all?
2016 ECM, Ive heard these cant be tuned for shit and need to be flashed to 2015?
Has an AEM 380LPH pump, to an Aeromotive A1000 FPR.
Im getting 70 PSI at the Regulator into the rail.
The engine will run if you spray starting fluid into the intake.
Main questions are:
Can it run with no FPCM connected at all?
Which year OS should it be flashed too?